Руководство по ремонту фотокамеры Konica Minolta Dynax 7D
Файл в формате PDF на английском языкеРазборка, замена узлов, описание настроек.
Также в архиве имеется программа настройки 5D и 7D.
ссылка скрыта от публикации
Содержание:
- Precautions
- Discharge
- To inhibit flash charge
- To activate without exterior parts
- 1. Disassembly of the exterior parts
- Wires arrangement
- 2. Disassembly of the TEBURE ASSY, SHUTTER ASSY
- 3. Disassembly of the MIRROR BOX ASSY, BATTERY HOLDER
- 4. Disassembly of the IMAGE BOARD ASSY, MAIN BOARD ASSY
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the TOP COVER ASSY
- 9. Disassembly of the BACK COVER ASSY
- 10. Disassembly of the CCD ASSY, DC JACK HOLDER
- 11. Disassembly of the CARD COVER HOLDER, SIDE COVER, FRONT COVER ASSY
- How to replace "SHUTTER ASSY"
- Required adjustment, setting and confirmation items after repairing (exchanging parts)
- Related adjustment and required setting items
- Using HIT System
- Adjustment/Check items available with 2181 ROM Pack
- Viewfinder Back Adjustment
- Manual Set SS & X-Sync. Time-lag Check
- Manual Set SS Adjustment
- SPC Position Adjustment
- Aperture Preset Check/Adjustment
- PI-PR Adjustment
- Preparation before AF adjustment
- AF Area Adjustment
- Pitch Yaw Adjustment
- EZ Check
- EZ Adjustment
- Assist MODE
- LCD Displays Check
- Preparing the 2181 adjustment program
- Starting up the 2181 adjustment program (in the adjustment mode).
- Back up Flash ROM data of Master Body
- Adjustment of CCD Vsub voltage
- Setting of Master body and chart for the
- adjustment of CCD position
- Adjustment of CCD position and perspective
- Adjustment of the frequency for camera shaking (ACT DRV FREQ)
- Adjustment of the servo for
- camera shaking (SERVO)
- Adjustment of the gyro for
- camera shaking (GYRO)
- Adjustment of the AE (AE)
- Sensitivity adjustment (GAIN)
- Adjustment of the defective pixel (DEFECT PIXEL)
- Adjustment of white balance (WB)
- Adjustment of the camera shaking
- compensation (SHAKE GAIN)
- Distination Seting(DISTINATION)
- Light Source-A Maintenance
- Error code on adjustment program
- Measuring instrument
- Subsidiary Materials