Konica Minolta Di1610 (Service Manual)

Сервисный мануал МФУ Konica Minolta Di1610​

Файл в формате PDF

Модели:

• Konica Minolta Di1610
• Konica Minolta Di1610f
• Konica Minolta Di1610p
• Konica Minolta Di1610fp

Содержание:

• GENERAL
• 1. SPECIFICATIONS
• 1-1. Di1610/Di1610p
• (1) Main Unit
• (2) GDI Printer Function (Di1610 only)
• (3) PCL Printer Function (Di1610p only)
• 1-2. Di1610f/Di1610fp
• (1) Main Unit
• (2) GDI Printer Function (Di1610f only)
• (3) PCL Printer Function (Di1610fp only)
• (4) FAX Function
• 2. PRECAUTIONS FOR INSTALLATION
• 2-1. Installation Site
• 2-2. Power Source
• 3. PRECAUTIONS FOR USE
• 3-1. To Ensure the Printer is Used in an Optimum Condition
• 3-2. Operating Environment
• 3-3. Power Requirements
• 4. HANDLING OF THE CONSUMABLES
• 5. MISCELLANEOUS PRECAUTIONS
• 6. PARTS IDENTIFICATION
• MAINTENANCE
• 1. MAINTENANCE SCHEDULE
• 1-1. Guidelines for Life Specifications Values by Unit
• (1) Life Specifications Values
• 2. REPLACEMENT/CLEANING OF PARTS
• (1) Cleaning of the Paper Take-Up Roller
• (2) Replacement of the Paper Take-Up Roller
• (3) Replacement of the Image Transfer Roller
• 3. REPLACEMENT OF UNITS
• (1) Replacement of the Toner Cartridge
• (2) Replacement of the Drum Cartridge
• (3) Replacement of the Fusing Unit
• DIS/REASSEMBLY, ADJUSTMENT
• 1. SAFETY INFORMATION
• 1-1. Laser Safety
• 1-2. Internal Laser Radiation
• 1-3. Laser Safety Label
• 1-4. Laser Caution Label
• 1-5. Precautions for Handling the Laser Equipment
• 2. PRECAUTIONS FOR DISASSEMBLY/ADJUSTMENTS
• 2-1. Parts That Must Not be Touched
• (1) Red Painted Screws
• (2) Variable resistors on board
• (3) Other Screws not Marked with Red Paint
• 3. DISASSEMBLY/REASSEMBLY
• 3-1. Identification of Exterior Parts and Removal Procedures for Them
• 3-2. Removal of Circuit Boards and Other Electrical Components
• (1) Removal of the Network Interface Card Board
• (Option for Di1610p, Di1610f, Di1610fp)
• (2) Removal of the Network Control Unit Board
• (Di1610f, Di1610fp only)
• (3) Removal of the PCL Board (Di1610p, Di1610fp only)
• (4) Removal of the Controller/Mechanical Control Board
• (5) Removal of the Control Panel
• (6) Removal of the Interface Board
• (7) Removal of the Plate NIC Board
• (Option for Di1610p, Di1610f, Di1610fp)
• (8) Removal of the Power Unit
• (9) Removal of the High Voltage Unit
• 3-3. Removal of Units
• (1) Removal of the IR Unit
• (2) Removal of the PH Unit
• 3-4. Disassembly of the Image Reading Section
• (1) Removal of the Original cover set sensor
• (2) Removal of the Upper Cover Assy. (Original Glass)
• (3) Removal of the Scanner Motor
• (4) Removal of the Scanner Assy.
• (5) Removal of the Timing Belt
• 3-5. Disassembly of the Main Drive Section
• (1) Removal of the Main Motor
• (2) Removal of the Paper Empty Sensors
• (3) Removal of the Paper Take-Up Solenoid
• (4) Removal of the Paper Take-Up Clutch Gear
• (5) Removal of the Torque Limiter
• (6) Disassembly of the Fusing Unit
• 4. ADJUSTMENTS
• 4-1. Electrical/Image Adjustment
• (1) Accessing the Service Mode
• (2) Accessing the “ADJUST” Menu
• (3) Printing a Test Pattern
• (4) Margin Adjustment (Leading Edge/Trailing Edge/Both Sides)
• (5) Printer’s Main Scanning Registration Adjustment
• (6) Printer’s Sub-Scanning Registration Adjustment
• (7) Scanner’s Main Scanning Zoom Ratio Adjustment
• (8) Scanner’s Sub-Scanning Zoom Ratio Adjustment
• (9) Scanner’s Main Scanning Registration Adjustment
• (10) Scanner’s Sub-Scanning Registration Adjustment
• 4-2. ADJUSTMENT OF JUMPER SWITCHES ON NCU BOARD
• 5. MISCELLANEOUS
• 5-1. Removal of the Mechanical Counter (Option for Di1610, Di1610p)
• 5-2. Updating the Firmware
• (1) Installing the Printer Driver/ TWAIN Driver Using Plug and Play
• (2) Procedure for Upgrading the Firmware
• (Engine firmware/ Copier firmware/ FAX firmware/
• PCL firmware)
• 5-3. Procedure for Upgrading the FAX Firmware
• (Upgrading Procedure Using Telephone Line from fax machine
• to fax machine)
• 5-4. Remedy for a Failed Updating of the Firmware
• 5-5. Remedy for a Failed Updating of the Firmware for PCL
• (Di1610p, Di1610fp only)
• 5-6. Moving the EEPROM
• CONTROL PANEL/SERVICE MODE DESCRIPTIONS
• 1. CONTROL PANEL DESCRIPTIONS
• 1-1. Names of Control Panel Parts and Their Functions (Di1610/ Di1610p)
• 1-2. Names of Control Panel Parts and Their Functions (Di1610f/ Di1610fp) . S-3
• 2. FUNCTIONS OF SWITCHES AND PARTS ON PWBs
• 2-1. Circuit Board Locations (Di1610)
• 2-2. Circuit Board Locations (Di1610p)
• 2-3. Circuit Board Locations (Di1610f)
• 2-4. Circuit Board Locations (Di1610fp)
• 2-5. PWB-P (Controller/Mechanical Control Board)
• 2-6. PWB-IF (Interface Board)
• 2-7. NCU (Network Control Unit Board) (Di1610f, Di1610fp only)
• 2-8. PCL (PCL Controller Board) (Di1610p, Di1610fp only)
• 2-9. NIC NC-5 (Network Interface Card Board)
• (Option for Di1610p, Di1610f, Di1610fp)
• 2-10.NIC-IF (Plate NIC Board) (Option for Di1610p, Di1610f, Di1610fp)
• 3. STATUS MODE
• 3-1. Status Mode Function Tree
• 3-2. Status Mode Setting Procedure
• (1) Total Page
• (2) TX/ RX Result (Di1610f, Di1610fp only)
• (3) Print Report (Di1610p, Di1610f , Di1610fp only)
• 4. UTILITY MODE (Di1610/Di1610p)
• 4-1. Utility Mode Function Tree
• 4-2. Utility Mode Setting Procedure
• (1) Machine Setting
• (2) Paper Source Setting
• (3) User management
• (4) Copy Setting
• (5) Network setting
• 5. UTILITY MODE (Di1610f/Di1610fp)
• 5-1. Utility Mode Function Tree (Outline)
• 5-2. Utility Mode Function Tree (Details)
• 5-3. Utility Mode Setting Procedure
• (1) Machine Setting
• (2) Paper source setting
• (3) User management
• (4) Admin. management
• (5) Copy setting
• (6) FAX registration
• (7) TX operation
• (8) RX operation
• (9) Comm. setting
• (10) Reporting
• (11) Initial user data
• (12) Network setting
• (13) E-mail setting 1
• (14) E-mail setting 2
• (15) Scan setting
• 6. SERVICE MODE (Di1610/Di1610p)
• 6-1. Service Mode Function Tree
• 6-2. Service Mode Setting Procedure
• (1) <Procedure>
• (2) <Exiting Procedure>
• (3) <Changing the Settings for Service Mode Functions>
• 6-3. Service Mode Functions
• (1) Service's Choice
• (2) Adjust
• (3) Counter
• (4) Display
• (5) Function
• (6) Fixed Zoom Change
• (7) Factory Test
• (8) Clear Data
• 7. SERVICE MODE (Di1610f/Di1610fp)
• 7-1. Service Mode Function Tree (Outline)
• 7-2. Service Mode Function Tree (Details)
• 7-3. Service Mode Setting Procedure
• 7-4. Service’s Choice Functions
• (1) Marketing Area
• (2) Shipment Destination
• (3) Leading Edge Erase
• (4) Trailing Edge Erase
• (5) Vertical Edge Erase
• (6) FLS Paper Size
• (7) TX Speed
• (8) RX Speed
• (9) TX Level
• (10) RX Level
• (11) DTMF Level
• (12) CNG Level
• (13) CED Level
• (14) ECM Mode
• (15) Coding Scheme
• (16) Toner Empty Report
• (17) Protocol Report
• (18) GDI Time out (Di1610f only)
• (19) Toner Empty Stop
• (20) Pre-rotation
• (21) Fuser Temp Ad.
• 7-5. Adjust Function
• (1) Adjust
• 7-6. Counter Function
• (1) Counter
• 7-7. Display Function
• (1) Display
• 7-8. Function
• (1) Function
• 7-9. Soft Switch Function
• 7-10.Reporting
• (1) Service Data List
• (2) Error Code List
• (3) T.30 Protocol List
• 7-11.Admin. Registration (Administrator number registration)
• 7-12.Fixed zoom change
• (1) <Metric>
• (2) <Inch>
• 7-13.Factory Test
• 7-14.Clear Data
• (1) DRAM clear
• (2) SRAM clear
• (3) Memory clear
• (4) Total clear
• (5) PM counter (clear)
• (6) I/C counter (clear)
• (7) Application counter (clear)
• (8) Scan counter (clear)
• (9) Printer JAM counter (clear)
• (10) ADF JAM counter (clear)
• (11) Trouble counter (clear)
• 8. Security Mode
• 8-1. Security Mode Function Tree
• 8-2. Security Mode Setting Procedure
• (1) Security
• 9. Soft Switch Set (Di1610f/Di1610fp only)
• 9-1. Description
• 9-2. Default setting
• (1) Country for each Marketing area
• 9-3. Default soft switch setting for each market area 1
• 9-11.Soft Switch List
• 9-12.Soft Switch definition
• 10. Fax Protocols
• 10-1.G3 ECM (G3 Error Correction Mode)
• 10-2.Line Control
• (1) Procedure of G3 mode communication
• 10-3.Table of reference code
• 10-4.How to analyze the T30 protocol monitor
• TROUBLESHOOTING
• 1. INTRODUCTION
• 1-1. Electric Components Check Procedures
• (1) Sensors
• (2) Switches
• (3) Solenoids
• (4) Motors
• 1-2. Overall Control Configuration
• 2. PAPER MISFEED
• 2-1. Initial Check Items
• 2-2. Paper Misfeed Displays
• 2-3. Locations of Misfeed Detection Sensors
• 2-4. Misfeed Detection Timing and Troubleshooting Procedures
• (1) Paper Take-Up/Transport Misfeed
• (2) Fusing/Exit Misfeed
• 3. MALFUNCTIONS/WARNING
• 3-1. List of Malfunctions
• 3-2. Malfunction Detection Timing and Troubleshooting Procedures
• (1) C0045: Fuser fan motor error
• (2) C0210: H.V. abnormal
• (3) C0500: Fuser warm up error
• (4) C0510: Fuser temperature low
• (5) C0520: Fuser overheat
• (6) C0650: Scanner home sensor error
• (7) C1200: ASIC memory abnormal
• (8) C1300: Polygon mirror motor error
• (9) C133B: Communication with option error
• (10) C133C: Modem error
• (11) C133D: ROM checksum error
• (12) C13F0: Laser error
• (13) C1468: EEPROM error
• (14) C14A3: IR lamp malfunction
• 4. MALFUNCTIONS RELATED TO POWER SUPPLY
• 4-1. Power is not Turned ON.
• 5. IMAGE QUALITY PROBLEMS
• 5-1. Troubleshooting Image Quality Problems
• 5-2. Initial Checks
• 5-3. Troubleshooting for Specific Image Quality Problems
• (1) Image reading system: Blank or black prints
• (2) Image reading system: Low image density
• (3) Image reading system: Foggy background or rough image
• (4) Image reading system: Black streaks or bands
• (5) Image reading system: Black spots
• (6) Image reading system: Blank streaks or bands
• (7) Image reading system: Uneven image
• (8) Printer system: Blank or black prints
• (9) Printer system: Blank spots
• (10) Printer system: Smears on back
• (11) Printer system: Low image density
• (12) Printer system: Foggy background
• (13) Printer system: Blank streaks or bands
• (15) Printer system: Offset image
• (16) Printer system: Uneven image
• 6. FAX Error (Di1610f/Di1610fp only)
• 6-1. Communication Error
• (1) Outline
• (2) Error occurring during transmission
• (3) Error occurring during reception
• 6-2. Error Code
• (1) Reception
• (2) Transmission